B-1 Bomber - Departure from LB Airport, May 18, 2009‏

Started by CHILIBEAN, May 16, 2009, 12:35:16 AM

Previous topic - Next topic

GTagami

Quote from: CHILIBEAN on May 18, 2009, 09:23:31 PM
It was an awesome sight! Keith, Robert, nice hangin' with you guys today.

Nice hanging and meet you Glen

Ditto, man. Good times all around.
Canon stuff.

phantomphan1974

Damon Duran-Phantomphan1974 Photography (FB, IG, Twitter)
Phantoms Phorever
OCSD Air Support Unit-Photographer
F-4 Phantom II Society

phantomphan1974

Quote from: GTagami on May 18, 2009, 09:27:55 PM
Wow, that was one heck of a turn. He ended up east of KLGB before heading north.
No he made the normal departure turn, that is just where I was when I saw him.  But he did gain altitude pretty quickly.
Damon Duran-Phantomphan1974 Photography (FB, IG, Twitter)
Phantoms Phorever
OCSD Air Support Unit-Photographer
F-4 Phantom II Society

phantomphan1974

About a 40 second piece.  It was shot from opposite of you guys.  Probably that parking structure.
Damon Duran-Phantomphan1974 Photography (FB, IG, Twitter)
Phantoms Phorever
OCSD Air Support Unit-Photographer
F-4 Phantom II Society

rander

You don't see a B-1 Bomber take off every day. looks like lots of people lining the fences of Long Beach Airport just waiting for those afterburners to light and the aircraft to lift off.
Memberships www.apsocal.com
                  www.fencecheck.com
                  www.tomcat-sunset.org
                  www.cv41.org
                  USS Midway Museum Volunteer

                   Veteran Tomcat Tweaker

WARBIRD KEITH

back online finally! Great to see everybody  again, will post pics soon, in the next few days

NikonGuy

Fernando Sedeno
Camera: Nikon D90 DSLR
Nikkor DX 18-55mm ED AF
Nikkor 70-300mm ED-IF AF-S VR
Member of... AOPA,PHPA, and ISAP.
www.flickr.com/photos/fernandosedeno
www.helispot.com/who/102247-Fernando+Sedeno/
www.jetphotos.net/showphotos.php?userid=32801
www.flightaware.com/user/Nando08

Midnight Mover

Quote from: WARBIRD KEITH on May 22, 2009, 12:44:40 PM
back online finally! Great to see everybody  again, will post pics soon, in the next few days

Good to have you back :)

aero-engineer

Camera: Nikon

"The work of the individual still remains the spark that moves mankind ahead" - Igor I. Sikorsky

NikonGuy

Fernando Sedeno
Camera: Nikon D90 DSLR
Nikkor DX 18-55mm ED AF
Nikkor 70-300mm ED-IF AF-S VR
Member of... AOPA,PHPA, and ISAP.
www.flickr.com/photos/fernandosedeno
www.helispot.com/who/102247-Fernando+Sedeno/
www.jetphotos.net/showphotos.php?userid=32801
www.flightaware.com/user/Nando08

rander

Quote from: aero-engineer on May 29, 2009, 09:27:57 PM
In case you were wondering why the B-1 was at KLGB:

http://www.aerotechnews.com/local/business/Boeing-team-rebuilds-B-1-backbone--for-U-S--Air-Force

Kevin
aero-engineer

Thanks for posting the link for that article. That just shows the length of repairs needed to keep aircraft flying. Working at North Island like I do, I have seen thing done just on the F/A-18 aircraft from  fuelcell floors and lower center structure to complete Center Barrell changes done and even whole tail sections replaced skillfully and expertly done so that each and every aircraft will retain all of the services and performance that Boeing says the aircraft will do.  Its actuall really amazing all the things you have to do "under the skin" at aircraft overhaul facilities like The Fleet Readyness Center South West. FRCSW has a Machine shop and a sheet metal shop that can completely manufcture just about any structural part be it Aluminum, Titanium, or Stainless Steel, annoidize it, alodine it, plate it, clean it and paint it and then mate it to the aircraft drill the holes amd install the fastening devices.
Memberships www.apsocal.com
                  www.fencecheck.com
                  www.tomcat-sunset.org
                  www.cv41.org
                  USS Midway Museum Volunteer

                   Veteran Tomcat Tweaker

Midnight Mover

Quote from: rander on May 30, 2009, 06:03:48 AM
Thanks for posting the link for that article. That just shows the length of repairs needed to keep aircraft flying. Working at North Island like I do, I have seen thing done just on the F/A-18 aircraft from  fuelcell floors and lower center structure to complete Center Barrell changes done and even whole tail sections replaced skillfully and expertly done so that each and every aircraft will retain all of the services and performance that Boeing says the aircraft will do.  Its actuall really amazing all the things you have to do "under the skin" at aircraft overhaul facilities like The Fleet Readyness Center South West. FRCSW has a Machine shop and a sheet metal shop that can completely manufcture just about any structural part be it Aluminum, Titanium, or Stainless Steel, annoidize it, alodine it, plate it, clean it and paint it and then mate it to the aircraft drill the holes amd install the fastening devices.

And lots of money too ::)

NikonGuy

Fernando Sedeno
Camera: Nikon D90 DSLR
Nikkor DX 18-55mm ED AF
Nikkor 70-300mm ED-IF AF-S VR
Member of... AOPA,PHPA, and ISAP.
www.flickr.com/photos/fernandosedeno
www.helispot.com/who/102247-Fernando+Sedeno/
www.jetphotos.net/showphotos.php?userid=32801
www.flightaware.com/user/Nando08


Quick Reply

Warning: this topic has not been posted in for at least 365 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it has been approved by a moderator.

Name:
Verification:
Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:

How many engines are on a Lockheed L-1011?:
How many engines are on a C-17 Globemaster III?:
Shortcuts: ALT+S post or ALT+P preview